3D wall panel / Textured wall panel - Version 2

Cheap like me and don't want to buy those 3D textured wall panels?

print and jazz up your ugly wall with these 3D wall panels.

Light weight design so you can hang using any double sided tape or adhesive.

• i recommend printing with a smooth plate if using double sided tape and textured plate if mounting with glue/adhesive.
• be careful when mounting, the tips are very pointy.

important note:

• be sure to have an extremely clean plate before printing! i recommend cleaning the plate edge to edge.
• turning up the part fan will help with cleaner outer walls.
• NO Support needed.
• My profiles are set to NOT slowdown for overhangs and to have a constant fan speed. this will give an overall better finish and cut down on printing times. please be aware of this if not using my profiles or when scaling up/down.

All walls are exactly 1mm thick

A1 Mini version: 175x175x26mm (53G)

A1 : 240x240x26mm (89G)

• P1P,P1S,X1C: Please refer to this page to take advantage of full build plate dimensions.
• [https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations](https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations)

please share your photos, i would love to see them printed in some color changing filaments or tri-color silk filaments or go nuts and use UV/glow in the dark filaments!