Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Smart_Recycled Blanco Transmission Distance: 6.4
PLA BambuLab Basic Red Transmission Distance: 4
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blanco
At layer #15 (1.28mm) swap to Red
At layer #24 (2mm) swap to Blanco for the rest.