Created some crib pegs to go along with my crib board model:

[https://makerworld.com/en/models/578508](https://makerworld.com/en/models/578508)

I have a few print profiles:

1. Set of 2 (the number that will work with the travel crib board and fit in the storage area). Using AMS to do all 3 colors in one print job, set to print by object (2 pegs = 1 object). Normally I might be concerned about the blob at the beginning but since there is a brim, the blob simply forms on the beginning of the brim which is discarded.
2. Set of 3 (again with AMS; 3 pegs = 1 object) for those who may want 3 of each color for another board or use.
3. Individuals…just 3 pegs all the same on the plate, you can make more or print less however you wish, this may be easier for those without AMS.