Deadpool with Lady Deadpool Wall Art. (hueforge). This is a 4 Color Print.

See Printing instructions below.

you can scale to any size you want, but make sure you don't change the “Z” axis or it will throw off the color sequence.

Need a way to display theses? check out my Wall Mounted Modular Hueforge Display complete it with the optional Desk Mount

Printing Instructions:

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

The Model is 161.8x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm (if you are using my print profile, I have set the bottom layers to print thicker, this saves about an hour+ off the time. all the other layers are at 0.04mm).

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Sunny Orange Transmission Distance: 8
PLA Sunlu Beige Transmission Distance: 7.5
PLA+ Sunlu White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #14 (0.76mm) swap to Sunny Orange
At layer #23 (1.12mm) swap to Beige
At layer #31 (1.44mm) swap to White for the rest.