A fridge magnet in the shape of a bow arrow. You can use it to hang, among other things, a shopping list or various important information on the fridge or other metal elements.
The arrow can also be used to play jokes and pranks by mounting it, for example, on a car body, simulating an archer's attack on the car.
The arrow is made in three lengths, 140 mm, 190 mm and 240 mm.
The arrow can be printed in the form of separate elements (rod, fletching, tip) in selected colors and then connected together according to the included graphics.
It can also be printed in one part, choosing the appropriate model.
You can mount a fi8x3 and fi10 mm magnet to the arrow. In the case of a multi-element arrow for a 8 mm magnet, the rod and the tip are set evenly, for a 10 mm magnet, the tip is moved out relative to the rod. The attached drawing shows the locations for the selected magnets.

The elements fit together by pressing, you can additionally use glue to obtain greater stiffness of the arrow and better connection of the elements.
The arrow was printed from white, red and yellow PLA.
If you like my model, leave a comment and a boost.