Project: Alien Romulus

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Paramount 3D Black Cherry Transmission Distance: 2
PLA Overture Red Transmission Distance: 4.8
PLA Paramount 3D Orange transparent Transmission Distance: 12
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Black Cherry
At layer #13 (1.12mm) swap to Red
At layer #20 (1.68mm) swap to Transparent Orange for the rest.