PLEASE READ: For plate number 5 in the A1 print profile, set the threshold angle of the supports to 60 degrees so that the dovetail joints of the three legs are supported. 

3D Theory here! Check out my latest creation: the Stealth Geometric Side Table. I’ve put a cool new spin on the classic Circular French Side Table by mixing in some sleek Stealth and sharp Geometric design elements. Printed on the Bambu Lab A1, this design is not just a side table, it’s a fun little piece! You can use it just about anywhere to place light objects like your phone, small book, or cup.

Please Note: up, the 3MF file includes the tabletop along with all the other parts, but make sure to print the tabletop separately for the best results. Please note: the 3D print gcode and 3mf files are for PETG so make sure to change this if you're printing with another material.

IMPORTANT UPDATE: I have updated the 3D model of the Stealth Geometric Side Table. Someone had requested that I make the top and bottom part of the stem the same size so that the stems can be stacked one on top of each other, so that the table can be taller and more practical in use. I have updated this change, but please note, this is very important, that the top and bottom stem are unique from each other. So if you don't want to print the second stem to make it higher, you want to stick with the OBJ I have provided that says StemStealth_BOTTOM and only use StemStealth_TOP to make the tabletop taller so that everything aligns. I have also updated the gcode file and the 3mf file with the new StemStealth_BOTTOM to be included.

Link to Assembly Video: