3D printer magnets of your favorite 3D printers

The range

• Bambu Lab X1C (Featuring a fully loaded AMS)
  • Colours: Features 6 colours as standard (Silver, White, Black, 3x filament colours)
  • Nozzle: Available in both the 0.2mm and 0.4mm nozzle profiles, but I'd heavily recommend 0.2mm if available
  • Magnets: 1x 50x20x1.5mm Magnetic Sticker (Linked in BOM)
• Bambu Lab X1C
  • Colours: Features 4 colours as standard (Silver, White, Black, filament colour)
  • Nozzle: Available in both the 0.2mm and 0.4mm nozzle profiles, but I'd heavily recommend 0.2mm if available
  • Magnets: 2x 15x1.5mm Magnetic Stickers (Linked in BOM)
• Prusa Mk4 (Featuring a fully loaded AMS)
  • Colours: Features 6 colours as standard (Orange, White, Black, Silver, 2x filament colours)
  • Nozzle: Available in both the 0.2mm and 0.4mm nozzle profiles, but I'd heavily recommend 0.2mm if available
  • Magnets: 2x 15x1.5mm Magnetic Stickers (Linked in BOM)
• Prusa Mk 4
  • Colours: Features 4 colours as standard (Orange, Black, Silver, White)
  • Nozzle: Available in both the 0.2mm and 0.4mm nozzle profiles, but I'd heavily recommend 0.2mm if available
  • Magnets: 2x 15x1.5mm Magnetic Stickers (Linked in BOM)
• Delta
  • Colours: Features 4 colours as standard (Silver, White, Black, Nozzle colour)
  • Nozzle: Only available in 0.2mm as not enough details work when sliced for a 0.4mm nozzle.
  • Magnets: 1x 50x20x1.5mm Magnetic Sticker (Linked in BOM)

Profiles:

I have uploaded 2x profiles, one for 0.2mm nozzles, and one for 0.4mm nozzles. Both feature a separate plate for each magnet so you can just select and print the one you want, but please note the 0.4mm nozzle profile does not include the Delta printer.

All photos are of magnets printed with the 0.2mm profiles.

All magnets in both profiles have been fully painted.

Settings:
Whilst I heavily recommend using the profiles, you choose to slice these yourself:

• Layer Height: Layer height can make a big difference with quality here, but in the interest of speed (especially due to being multi-colour), I've set the 0.2mm profile to 0.14mm layer height, and the 0.4mm profile to 0.16mm layer height.
• Infill: 15%

Magnets:
The magnets you require vary depending on which design you print, I list which magnets you need and how many in the ‘Range’ list at the start of this description (also detailed in one of the images), and all magnets mentioned are listed in the BOM (Bill of Materials).