Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 106.95x93.66mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA PolyLite White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:
Start with Dark Red
At layer #22 (1mm) swap to Orange
At layer #32 (1.4mm) swap to Yellow
At layer #38 (1.64mm) swap to White for the rest.