Multicolor_Deadpool and Volwerine

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x112.45mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
Black Transmission Distance: 0.3
Red Transmission Distance: 4
Yellow Transmission Distance: 6
Metallic Silver Transmission Distance: 0.5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #14 (1.2mm) swap to Yellow
At layer #22 (1.84mm) swap to Metallic Silver for the rest.