Pine multi-module fridge magnet 松树多模块冰箱贴

This work is a multi-segment modular pine refrigerator magnet, which is composed of at least 3 parts (tree top, crown, and trunk) that can be split into multiple segments for the fixation of multiple post-it notes, and is also equipped with a "grass" module, which can not only be magnetically suct, but also have an additional clamp-on fixed post-it note, and can even be used as a bookmark.
A minimum of SIX 4X2 magnets are required for this work, and the magnets are installed in the correct direction to attract each module to each other.
The first 11 layers of this work are recommended to be printed at a slow speed of 50%, due to the small size of this work, the hot bed temperature can be appropriately increased when the printing workpiece is not firmly adhered to, which can ensure better printing quality, and ensure the cleanliness of the printhead and printing panel before printing.
本作品是多段模块式松树冰箱贴，至少由3部分（树顶、树冠、树干组成)可以拆分成多段式用于多张便利贴的固定，同时还配置了”草地”模块，不仅可以磁吸，还可以多一个夹紧式固定便利贴，甚至还可以作为书签使用。
本作品至少需要6个4X2的磁铁，安装磁铁时确保磁极方向正确可以使每个模块互相吸引。
本作品打印的前11层建议用50%的慢速打印，由于本作品尺寸较小，打印工件打印时出现粘不牢的情况可以适当增加热床温度，可以保证更好的打印品质，同时打印前确保喷头和打印面板的清洁。

Descrição