Simple Shelf Bracket for wallmounting with screws

Originally designed for IKEA BERGSHULT but every other board or shelf wider than 190mm will also work fine!

It is recommended to use 3 or 3.5mm screws to mount the shelf on the bracket.

For wall mounting, 5.0 or 6.0mm flat head screws with shaft are recommended.

To be on the safe side, at least 25% infill is recommended.

I printed my shelf brackets out of ABS. PETG works too. PLA might not be stable enough, this should be tested.

The model must be printed laying on the side so that the arrangement of the layers is correct.