Welcome and thank you for thinking about using my model and possibly my entire project.

The purpose of this project is to allow the user to create a volume control box for their computer that allows the user to control individual program volume. With the parts below you will not need to solder anything, I have supplied the raw files so feel free to modify to any parts you may find yourself.

Parts

1. 3d printed parts
2. Slide potentiometer
3. Arduino Nano
4. Arduino Nano Carrier Board
5. Toggle Push Buttons (Optional)
6. Wires
7. Wire Connectors
8. USB-A to USB-C Cable

Software

You will need to install python on your computer and download the software that runs the volume control. I have a GitHub where you can download the python script, Arduino code, and the config file.

You will need to download the Arduino IDE in order to download the Arduino sketch to the Arduino.

Directions on how-to run the python program can be found on the GitHub page, I will continue to update the project there.