Tired of having your prints turn out noting like the posted “photo”? Then you've come to the right place, I only post photos of the actual print and not the photos they were generated from.

If you want to make a request and get FREE *Patreon exclusive* models(like the ones below), members only models, and commercial licenses to sell your physical prints visit my Patreon in bio [http://patreon.com/JustBe3D](http://patreon.com/JustBe3D)

Important The photo is of the 5 color version. The 5 color version uses brown under the yellow for more of a gold look. The 4 color version uses black under the yellow for more of a dark yellow look.

Instructions
Can be rescaled just DO NOT change the Z axis

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

5 color

Filaments Used:
PLA Overture Black Transmission Distance: 0.4
PLA Overture Space Gray Transmission Distance: 1.4
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA Overture Chocolate Transmission Distance: 0.2
PLA Elegoo Yellow Transmission Distance: 7.2
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Space Gray
At layer #16 (1.36mm) swap to Jade White
At layer #21 (1.76mm) swap to Chocolate
At layer #26 (2.16mm) swap to Yellow
At layer #30 (2.48mm) swap to Jade White for the rest.

4 color

Filaments Used:
PLA Overture Black Transmission Distance: 0.7
PLA Overture Space Gray Transmission Distance: 1.4
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA Elegoo Yellow Transmission Distance: 7.2
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Space Gray
At layer #16 (1.36mm) swap to Jade White
At layer #21 (1.76mm) swap to Black
At layer #26 (2.16mm) swap to Yellow
At layer #30 (2.48mm) swap to Jade White for the rest.