Originally designed by Ammolytics the OpenTrickler is a DIY automated Trickler used for reloading.

The designs for the OpenTrickler can be found here: [https://blog.ammolytics.com/2019-04-30/diy-smart-trickler.html](https://blog.ammolytics.com/2019-04-30/diy-smart-trickler.html)

I also used Koksala's design for a digital scale pan which can be found here: [https://www.thingiverse.com/thing:4561972](https://www.thingiverse.com/thing:4561972)

I went ahead and added a manual bulk powder thrower to speed things up while also keeping costs down, as well as improved a little upon the design by adding an adjustable riser for the trickler as well as making the base of the riser adjustable for angle.

Included in these files are the design for the Draft guard for a A&D scale so you don't have to drill into your factory one, as well as a few other small improvements such as a powder placement guide and various other things, see the video above for more details.

If you like these designs and find them useful help me out by liking/commenting/sharing this up at the top of this page. It helps keep me motivated to keep making stuff to share!

Please note when downloading each individual file there are helpful tips accompanying them for successful and functional prints.

Aside from the parts and tools necessary to build an OpenTrickler, in order to fully build this you will also need a well tuned 3Dprinter, a powder measure, an A&D analytical balance, as well as the following:

Crazy glue

(3) M4 heat set inserts

(3) M4x20 or longer bolts

Teflon tape

Double-sided tape

Rubber gasket material