This model is a remix of BaGooN's ‘A1 MINI Hex Pattern Handle’ with a twist. It includes storage spots for most of the items that come in the A1 Mini accessory box. The holder contains spots for:

1x 1.5mm T-handle

1x 2mm T-handle

1x Nozzle cleaner

2x Heatbed Nozzle Wiper - A1

5x Replacement Filament Cutter

1x PTFE Tube Remover V2.2 for the A1(by R3DPanda: [https://makerworld.com/en/models/79328?from=search#profileId-83766](https://makerworld.com/en/models/79328?from=search#profileId-83766))

1x Bambu Hotend - A1 Series

• Note: I did not have a spare hotend to test. If someone prints this and has a spare hotend to test fit, I would love to see it. :)

This is installed using the stock screws on the A1 Mini.

Print settings I used:

• Filament: Bambu PLA Matte (Grey)
• Layer Height: 0.2mm
• Walls: 4
• Infill: 20%
• Supports: Manual Tree(see pictures for locations)
• All other settings standard to OrcaSlicer 0.2 preset for the X1C

This is my first ever uploaded model. So any constructive criticism and feedback is certainly welcome! :D Happy Printing!