3D Printed Super Mario Figure (Non-AMS, 17cm tall)

This 3D printed Super Mario figure is a great way to show your love for the classic video game character. The figure is printed in multiple parts, which makes it easy to assemble and paint. It is also non-AMS, so you can print it with any type of 3D printer. The figure is 17cm tall, making it a great size for display on a shelf or desk.

Materials:

• 

• 3D printer
• PLA filament
• Gray, red, blue, and yellow paint
• Paintbrushes
• Superglue

Instructions:

1. Print the Super Mario figure parts using PLA filament.
2. Once the parts are printed, sand them down to remove any rough edges.
3. Paint the Super Mario figure parts using the appropriate colors.
4. Once the paint is dry, glue the parts together using superglue.
5. Let the glue dry completely before displaying the figure.

Tips:

• For best results, use a high-quality PLA filament.
• If you want a smoother finish, you can sand the parts before painting them.
• Use a primer before painting to help the paint adhere better.
• Be careful not to use too much glue, as this can cause the parts to warp.
• Let the glue dry completely before handling the figure.

Additional details:

• The type of filament that you used to print the figure: PLA
• The slicer settings that you used: Default settings for the slicing software that you are using
• The amount of time it took to print the figure: Approximately 4 hours
• Any challenges you faced while printing or assembling the figure: None

OTHERS MODEL:

[https://makerworld.com/en/models/544822#profileId-462616](https://makerworld.com/en/models/544822#profileId-462616)

[https://makerworld.com/en/models/544831#profileId-462630](https://makerworld.com/en/models/544831#profileId-462630)

[https://makerworld.com/en/models/544836#profileId-462636](https://makerworld.com/en/models/544836#profileId-462636)

[https://www.instagram.com/enganche_3d/](https://www.instagram.com/enganche_3d/)