CASE + BOX GRIDFINITY 5x4

• Size : 230mm x 188mm x 98mm (10u)
• Set : 1x Base, 3x Cover *, 1x Handle, 4x Clip
• Revision : 03

Use this Case according to your individual requirements and print the Gridfinity Boxes as you need them.

ℹ️   Follow the instructions after 3D printing

Place the cover (Plate 3 / Plate 4 / Plate 5) on the base (Plate 1) so that the slanted bars are on the back.

Klick the handle (Plate 6) into the provided recesses on the front of the base. (Use the inlet slopes!)

Attach the clips (Plate 2). Mount the closed clips on the back and the ones with grooves on the front.

Press the noses of the clips into the recesses provided in the base and cover. (At first it's a bit difficult!)

For better properties (sealing), you can insert a TPU filament ø1.75 into the groove of the base.

* Cover (Plate 3) = Grid | Cover (Plate 4) = Standard | Cover (Plate 5) = Gridfinity (stacking lip)

Gridfinity by Zack Freedman | [https://gridfinity.xyz](https://gridfinity.xyz)

Change Log : 

01 → Released version

02 → Adjustment base + cover

03 → Added cover types