Nozzle 0.8mm

Layer height 0.4mm

Filament: PLA, Bambu Marine Blue, Matte

Perimeters: 3

Infill: gyroid, 10%

Filament needed for the “Flat Step” version: 755gr

Filament needed for the “Light Step” version: 718gr

Filament needed for the TPU parts combined (cover1 + left pad + right pad): 163gr

Weight supported: 145kg (two people actually stepped on it together to test it).

Measures: 230x210mm

Height of the step: 90mm

Height of the step with TPU parts added: 96mm

---------------------------------------------------------

Nove means 9 in Italian. This 9cm step is useful for allowing people to reach high objects or to facilitate getting off a vehicle, or even to use as a small stool for gardening. Keep in mind that it is not certified for use by disabled people or children, so use it with common sense. There are two versions of this step:
“NOVE Light Step” with holes, which is a bit lighter. And “NOVE Flat Step” with a flat, solid surface, which is just a bit heavier. Additionally, I have designed some accessories that I recommend printing in TPU: a non-slip cover in two versions, and non-slip feet.
It is not necessary to print the accessory parts in TPU.
The step, printed with the parameters indicated above, can support a weight of 145kg without breaking or deforming. It may support much more weight but it's untested. The light version prints in 7h 49mins (Bambu A1).

______________________________________________________________________________________________

喷嘴 0.8mm

层高 0.4mm

耗材: PLA, Bambu Marine Blue, Matte

周长: 3

填充: 旋转纹理, 10%

“Flat Step” 版本所需耗材: 755克

“Light Step” 版本所需耗材: 718克

TPU部件组合所需耗材 (cover1 + left pad + right pad): 163克

承重: 145千克（两个人一起踩上去测试的）

尺寸: 230x210毫米

台阶高度: 90毫米

加上TPU部件后的台阶高度: 96毫米

Nove在意大利语中表示9。这种9厘米的台阶可用于帮助人们够到高处的物体，或方便下车，甚至可以用作园艺的小凳子。请注意，它并未通过针对残疾人或儿童使用的认证，因此请用常识使用。这种台阶有两个版本: “NOVE Light Step” 带孔，稍微轻一些。以及“NOVE Flat Step” 带平坦的实心表面，稍微重一些。另外，我设计了一些建议用TPU打印的配件: 两种版本的防滑罩和防滑脚垫。 配件部分不必用TPU打印。 用上述参数打印的台阶可以承重145千克而不会断裂或变形。它可能支持更大的重量，但尚未测试。轻量版在7小时49分钟内完成打印 (Bambu A1)。