A roller coaster wheel bogie which is meant to be a show piece within your room.

Most pieces slide in with a little bit of effort making the final assembly quite sturdy. This also means that disassembling the wheels to their individual parts will be extremely difficult. So, make sure to line them up correctly.
The wheels should be the last things that are added when assembling. As they block some of the screws from being put in.

Can be printed without AMS however the black colours on the wheel holders will dissapear.

It weights roughly 1,5kg
A height of 25cm, length of 27,5cm and width of 14,5cm

It also needs the following parts which could be printed, (files not present)
8x Hex Screw M5x30mm

8x Hex Screw M5x25mm (can be substituted for M5x30mm)

16x Hex Nut M5

4x Hex Screw M10x70mm

2x Hex Screw M10x60mm

6x Hex Screw M10