Meet Jerry the Top Hat Monkey… a very casual AI Generated gentleman showing off his ambidextrous talents !

Another Fun adventure playing with Hueforge and AI imagery. I hope you like it…

Hueforge describe for my iteration as follows:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Overture Black Transmission Distance: 0.5
PLA Inland Tough Brown Transmission Distance: 0.5
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
PLA PolyTerra Army Beige Transmission Distance: 0.5
PLA PolyTerra Pastel Peanut Transmission Distance: 0.5
PLA BambuLab Matte Latte Brown Transmission Distance: 2
PLA Overture White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Brown
At layer #11 (0.96mm) swap to Dark Brown
At layer #17 (1.44mm) swap to Mandarin Orange
At layer #19 (1.6mm) swap to Army Beige
At layer #22 (1.84mm) swap to Pastel Peanut
At layer #25 (2.08mm) swap to Latte Brown
At layer #29 (2.4mm) swap to White for the rest.