Welcome to my first upload!

I came up with this design after searching for a way of storing my ever increasing collection of small parts.

I wanted the design to be strong, adaptable, easily customisable, and store my parts safely, thats how i come to design my Infinity Storage Tubs.

The tubs are designed to screw together and to hold an insert that best suits your needs.

You can use this design as a small storage solution just by printing the base, the lid and if required an insert, or you can expand it as many times as you like by printing the included extension, the possibilities are endless as you can just keep adding another extension!

The tubs have been designed to be strong and to have enough turns on the threads so you shouldn't have to worry about them becoming separated accidentally.

The inserts are designed to fit in both the base, and also in the extension (the base and extension have the same storage capacity) meaning you can truly customise the tubs as you would like.

I have included several inserts to be used with my design including

2 compartment

4 compartment

2 compartment - half height (2 of these fit stacked inside each section)

4 compartment - half height (2 of these fit stacked inside each section)

1 compartment - half height (2 of these fit stacked inside each section)

UPDATES

19/07/24 - Hollow extension added (without base) to extend compartment height.

19/07/24 - Spool insert added to hold with, yarn, thread, etc

If you would like any other type of insert designing then please feel free to get in touch.

The only part of this design that requires supports during printing is the extension as it is hollow in both ends, just enable build plate supports for this model (i have done this in the attached print profile)

Hope you enjoy my first design.