Desk Clock

[Introduction]

A Desk Clock! Or mantel clock, if you've got a mantel. The tilted base is optional, so if you want to place it higher up on a shelf or something.

The hour is shown through the hole, while the minute hand vaguely points in the direction of what minute it should be. You're probably not going to be timing your cooking to the second with this clock, but it's still a fun and interesting piece.

[Hardware & Filament]

Featured Filaments:

Bambu PLA Galaxy Nebula

Bambu PLA Metallic Iridium Gold

Bambu PLA Basic Blue Gray

Bambu PLA Glow Pink

Hardware:

Clock Components Kit 011

6x BT3x8mm Self Tapping Screws (I'm using Bambu's self tapping m3 screws which have a shorter head, but the model is built to accommodate a standard sized M3 socket cap head, and will work fine with M3 self tapping screws you can get off of amazon and the such)

[Assembly]

Install the clock mechanism and fix it into place with the nut provided with the clock kit. Install the hour dial and minute hand, aligning them for 12:00.

Install the clock face into the main body, securing it in place using the outer face ring and 4 self tapping screws.

Install the base using 2 self tapping screws

That's it! You're done!

Descrição