Remix based on this parametric rugged box by Whity

Inserts to store SD cards and game cartridges compatible with this design !
You can also check out my foldable Dice TowerBox made to fit inside my deckboxes !

One of the safest deckboxes I have and will ever made. Even better than the B alternative. I used it for the 2 past years and it never opened or broke in my bag 💪
Up to 130 double-sleeved cards (200 simple-sleeved or 400 sleeveless, 82×96×76mm). No problem to store Yu-Gi-Oh cards as well as Magic, Lorcana, and Pokemon.

Edit : Keep in mind that it's an “up to” estimation. You may not be able to store this much cards depending on their condition or the quality/thickness of your sleeves. For example, User_3949903037 is storing a 130 cards deck simple sleeved with drangonshield sleeves instead of the estimated 200. Please refer to the 82mm measure if unsure before print.

💾 Files included 💾
- the main part
- the lid
- latch (you need two)

🛠 Post-process 🛠
Just add the 6 screws (M3×20) and optionally a piece of TPU filament in the main part groove (may need a bit of glue to keep it in place)

✨ Remixes Shout-out ✨
A no-hardware version ? Sure ! (by JaimeGAlonso)
[https://makerworld.com/en/models/1355707](https://makerworld.com/en/models/1355707)

💵 A word to pro-printer/seller 💵
Attribution is always mandatory. Just add my instagram (@rubiksensei) and/or my Makerworld page link at the end of the product page.
Don't forget Whity as well for his great work on the original design !

📝 Updates 📝
2024-07-22
Made a mistake with the parametric original model and the inside volume was 80×96×76mm instead of 82×96×76mm.
It's now fixed. This mistake only impact people using my inserts, no need to worry if you don't use/plan to use them.

2024-10-13

Dividers added