Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Marvel Logo Bookmark
Guide for print without AMS
Project: MARVEL.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 160x72.27mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 2mm
Filaments Used:
PLA Overture Matte Jeans Red Transmission Distance: 0
PLA BambuLab Basic Black Transmission Distance: 0
PETG JAYO White Transmission Distance: 6
This print uses 3 unique filaments
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Jeans Red
At layer #4 (0.4mm) swap to Jeans Red
At layer #12 (1.04mm) swap to Black
At layer #14 (1.2mm) swap to White for the rest.
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta