Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm

Filaments Used:
PLA Smartfil Black Transmission Distance: 0.3
PLA Smartfil Red Transmission Distance: 2.3
PLA Smartfil Transmission yellow Distance: 5.8
PLA Smartfil White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #11 (0.96mm) swap to Yellow
At layer #14 (1.2mm) swap to White
At layer #26 (2.16mm) swap to Red
At layer #29 (2.4mm) swap to Yellow
At layer #30 (2.48mm) swap to White for the rest.