Q萌月饼仔 可爱月饼礼盒 中秋摆件 月饼公仔 中秋节礼品  Mooncake Figurine

原创模型，已注册版权，请勿商用！商用授权WX：CS99879    email：dunhui@me.com

中国传统节日：中秋节有吃月饼的习俗，象徵花好月圆，家人团聚的美好用意，我用广式月饼形像做了一个Q萌月饼仔形象公仔，面庞可以打开作为一个盒子，可以放月饼或者其他用途，为了方便没有多色打印的小伙伴，身体和上盖可以设置层高换色，单色也能手手动换色打印，面庞全部做了分件处理，打印后用502胶水组装，如果大家喜欢请点讚转发和助力我，谢谢！

打印注意事项：

材料我选用的petg，默认设置，身体和上盖已经设置好了层高换色，无需擦料塔，有多色系统可自动换色，没有多色的小伙伴可以在变色的层高设置手动换色！

身体和上盖已经设置好了支撑，非常容易去除，取出时请戴好手套防护，以免伤害！

由于我的打印板非常粘，不需要裙边，各位根据自己打印机的情况细小件请自行添加裙边。
 打印文件0.2层高，面庞和五官设置了可变层高增加细腻度，眼睛和腮红添加了底部LR标志识别左右，眉毛眼白和面部装饰物请自行识别左右位置，以免粘错。

中國傳統節日：中秋節有吃月餅的習俗，象徵花好月圓，家人團聚的美好用意，我用廣式月餅形像做了一個Q萌月餅仔形象公仔，面龐可以打開作為一個盒子，可以放月餅或者其他用途，為了方便沒有多色打印的小夥伴，身體和上蓋可以設置層高換色，單色也能手手動換色打印，面龐全部做了分件處理，打印後用502膠水組裝，如果大家喜歡請點讚轉發和助力我，謝謝！

打印注意事項：

材料我選用的petg，默認設置，身體和上蓋已經設置好了層高換色，無需擦料塔，有多色系統可自動換色，沒有多色的小夥伴可以在變色的層高設置手動換色！

身體和上蓋已經設置好了支撐，非常容易去除，取出時請戴好手套防護，以免傷害！

由於我的打印板非常粘，不需要裙邊，各位根據自己打印機的情況細小件請自行添加裙邊。

打印文件0.2層高，面龐和五官設置了可變層高增加細膩度，眼睛和腮紅添加了底部LR標誌識別左右，眉毛眼白和面部裝飾物請自行識別左右位置，以免粘錯。

Original model, not for commercial use! For commercial licensing, please contact: 

email：lijixian0001@gmail.com

Cute Mooncake Doll: Mid-Autumn Festival Mooncake Figurine, Holiday Gift, Adorable Mooncake Gift Box, Mooncake Model, Mid-Autumn Festival Gift

Chinese Traditional Festival: Mid-Autumn Festival

Mid-Autumn Festival is known for the tradition of eating mooncakes, symbolizing the beauty of a full moon and the joy of family reunion. Inspired by the appearance of Cantonese-style mooncakes, I've created a cute mooncake character figurine. Its face can open up to serve as a box, suitable for storing mooncakes or other items. To accommodate those without multi-color printing capabilities, the body and lid are designed with variable layer heights for color changes. Even in single color, manual color change printing is possible. The facial features are designed as separate parts for assembly using 502 glue after printing. If you like it, please like, share, and support me. Thank you!

Printing Instructions:

• I chose PETG material with default settings. The body and lid are configured with variable layer heights for color changes, eliminating the need for a purge tower. Automatic color change is supported for multi-color systems; for those without, manual color change can be set at the variable layer height.
• The body and lid are pre-supported and easy to remove. Wear gloves when handling to prevent injury.
• Due to my adhesive print bed, a skirt is unnecessary. Depending on your printer, consider adding a skirt for small parts.

Printing at 0.2 layer height. The facial structure and features are set with variable layer height for enhanced detail. Eyes and cheeks have bottom LR markers for left-right recognition. Please identify the left-right positions of eyebrows, sclera, and facial decorations to avoid misalignment.