This is my first attempt using Hueforge. LMK what you think of it.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x222.22mm in size

You may print at higher layer heights below the Min Depth of 0.4mm

The Max Depth is 2.4mm and the Actual Depth is 2.5mm

Filaments Used:

PLA PolyLite Black Transmission Distance: 0.3

PLA BambuLab Basic Blue Gray Transmission Distance: 3

PLA BambuLab Basic Gray Transmission Distance: 2

PLA BambuLab Basic Jade White Transmission Distance: 5

PLA BambuLab Basic Blue Transmission Distance: 4

PLA BambuLab Matte Marine Blue Transmission Distance: 0.5

This print uses 6 unique filaments

Swap Instructions:

Start with Black

At layer #7 (0.64mm) swap to Blue Gray

At layer #8 (0.72mm) swap to Gray

At layer #11 (0.96mm) swap to Jade White

At layer #14 (1.2mm) swap to Blue

At layer #22 (1.84mm) swap to Marine Blue for the rest.