A bottlecap container that is as small as possible while still having enough grip to open easily. Min/Maxed quite a lot. Each inside surface is expanded to the maximum (even the inside of the thread) to create the biggest space possible while still maintaining a small profile and enough thickness to last a while. Print in PETG or ABS for enhanced indestructibility, but PLA is totally fine. A textured buildplate can help a bit with grip but is not needed.

Uses only 2.47 g of filament, prints in about 10 minutes with the embedded slower security settings but feel free to do whatever your comfortable with. Had good prints in 5-6 minutes aswell

It's waterproof and probably air tight but you could upgrade that by squeezing a 7.9 - 8 cm piece of TPU filament in that gap on the inside of the bottlecap. But it's tricky to get the TPU in and it likes to pop out so maybe just don't, idk.

Use with caution. Is small enough to get lost and mistaken by a random trash bottlecap and might get thrown away. Even by yourself.

This is a remix of the mini bottle cap container by DrJones ([https://makerworld.com/en/models/49320?from=search#profileId-51228](https://makerworld.com/en/models/49320?from=search#profileId-51228))