***该模型有着较大角度的悬垂，建议先打印测试零件以保证悬垂部分可以被成功打印，否则您可能需要对打印参数进行调整

***推荐使用PLA-SILK进行打印，较低的层高和更慢的外墙速度以获得更精细的效果

***您需要的其他零件及工具：20个磁铁（尺寸直径4mm厚度3mm），胶水

***盖子与主体采用磁铁连接，您需要使用胶水固定磁铁以及主体和檐

***另外我上传了一个带有多色设置的3mf文件，该文件仅进行了上色并未对参数进行调整，打印前需要自行设置参数

2024.7.21更新

增加了5*2mm尺寸磁铁孔位的版本，但是没有进行公差测试，可能需要通过孔洞补偿功能来让磁铁很好的嵌在孔内

***This model has a large angle of overhang, it is recommended to print a test part first to ensure that the overhang part can be successfully printed, otherwise you may need to adjust the printing parameters

***Recommended to use PLA-SILK for printing, with lower layer height and slower exterior wall speed to achieve more refined effects

Other parts and tools you need: 20 magnets (diameter 4mm, thickness 3mm), glue

The cover is connected to the main body using magnets, and you need to use glue to secure the magnets, the main body, and the eaves

***In addition, I uploaded a 3mf file with multi-color settings, which only has color settings and has not been adjusted for parameters. You need to set the parameters yourself before printing