This model is a very simple customizable vase.

Updated code - MORE CUSTOMIZABLE!!

Thank you all so much for the recent support! I suffered a massive print failure the other day, totaling $55 in damages, this really means a lot and I really appreciate it!

Advantages of this Vase - Maker:

Multiple styles of vases.

Multiple ways to create your vase.

A unique outer shell to choose from

To Customize Your Vase:

All settings are described in the parametric model maker! Simply select the “customize" button to customize your vase! The model will auto-adjust your width to ensure the model is exactly the width you set. The parametric model maker will default to sliders, but if wanted, you can manually input a higher value. With high values of twist, your vase may turn into a screw. If your model ends up with holes in the side, I reccommend copy and pasting the code into the actual OpenSCAD software. I am not sure why, but there is a difference in the rendering between the two. Sorry for the inconvenience. If the center hole area of your vase ends up small, I recommend reducing the amount of twist in your vase and increasing the steps. I am sorry it must be this way, but it is the only way to ensure your vase does not end up with holes.

Print Settings:

You can use vase mode or normally print your model. Both work, however, vase mode turns out very weak. The model pictures were printed in Bambu Lab PLA Matte. Supports are not needed.

Final Thoughts:

More pictures coming soon! If this model gains more support, I will add more features to the vase customizer. If  you liked this model, please consider checking out my other customizable models and liking and sharing this model. Thank you for taking the time to read this and for your interest in my work.