Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size. You can change X and Y but Z must remain the same.
You may print at higher layer heights below the Min Depth of 0.48mm
Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
This print uses 5 unique filaments. Substitute as needed.
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #11 (0.96mm) swap to Dark Brown
At layer #14 (1.2mm) swap to Grey
At layer #18 (1.52mm) swap to White for the rest.
