Some simple printer-files to test the behave of your printer
- 30mm_cube_$$$.stl
A 30x30x30 mm cube, which has a number on the top.

• $$$ -> 010 can be used for a print with a nozzle of 0.1 mm
• $$$ -> 025 can be used for a print with a nozzle of 0.25 mm
• $$$ -> 040 can be used for a print with a nozzle of 0.4 mm
• $$$ -> 080 can be used for a print with a nozzle of 0.8 mm
• $$$ -> 100 can be used for a print with a nozzle of 1.0 mm

30mm_cube_4Level.stl A cube which can be used to check the behave how good the printer is doing the corner of cubs, when the cube decrease to 1/8 of the ground. The ground cube starts by 30x30x30 mm