Introduction

Hello, this is the Adjustable fully-printable modular system with which you can create a holder for your workshop tailored to your needs. For example, you can build a bracket for soldering, a bracket for painting miniatures, a vise and much more! If you have a suggestion for improvement, feel free to leave a comment. I will be glad for any feedback. You can also show which holders you have built and inspire others!

Sample holders

Little painter

• 2x legs
• 2x small console
• 1x right-hand thread stick
• 1x rotating connector
• 2x connection stick
• 2x rotating handle
• 1x painting attachment

Wire soldering station

• 2x legs
• 1x medium console
• 2x short console
• 3x right-hand thread stick
• 1x left-hand thread stick
• 4x rotating connector
• 4x rotating handle
• 5x connection stick
• 2x free connection stick
• 2x peg part 1
• 2x peg part 2
• 2x peg mount

PCB soldering station

• 2x legs
• 1x medium console ( or long console)
• 2x short console
• 3x right-hand thread stick
• 1x left-hand thread stick
• 4x rotating connector
• 4x rotating handle
• 5x connection stick
• 2x free connection stick
• 2x pcb holder

Vise

• 2x medium console
• 2x short console
• 4x legs
• 4x rotating connector
• 2x right-hand thread stick
• 2x left-hand thread stick
• 2x offset ring
• 4x connection stick
• 2x rotating handle
• 2x end cap
• 2x vise attachment

The Ultimate holder

• 4x medium console
• 3x short console
• 4x legs
• 2x semi RA-connector
• 2x free RA-connector
• 7x rotating connector
• 1x solder holder part 1
• 1x solder holder part 2
• 1x solder holder part 3
• 2x peg part 1
• 2x peg part 2
• 2x peg mount
• 6x rotating handle
• 9x connection stick
• 4x right-hand thread stick
• 4x left-hand thread stick
• 2x end cap
• 1x offset ring
• 2x free connection stick

Parts description

Consoles

The consoles are the main parts of this system. They have three different sizes: short console, medium console and long console. One thread stick can be clicked into the short console, two into the medium console, and three into the long console. You can freely combine right-hand thread sticks and left-hand thread sticks. There are threads at the end of the consoles that allow the consoles to be screwed into the rotating connector.

Legs

The legs are used to keep the holder standing on the table. They slide onto the console and have holes in them for attaching to the table top.

Connection sticks

There are two types of connection sticks: normal connection stick and free connection stick. Connection sticks are used to connect individual thread sticks to each other. The normal connection stick is also used to connect the thread stick and rotating handle. The free connection stick is used additionally to connect the thread stick and the rotating connector.

Thread sticks

There are two types of thread sticks: right-hand thread stick and left-hand thread stick. Thread stick is used to click into the console.

Rotating handle

This part is used to rotate with thread stick.

End cap

You can also attach thread stick in console with this part.

RA-connectors

You can use RA (right angle) connectors to attach two consoles together. The fixed RA-connector has a thread on both sides so it can be moved around the console using thread stick. The semi RA-connector has a thread only on one side and the free RA-connector has no thread so you can move around console freely.

Rotating connector

Rotating connector slides onto the console and can be moved with a thread stick. One end of the console, peg mount, pcb holder or solder holder can be attached to the thread. I recommend printing on the side with supports only on the printing plate. After printing, remove the supports and press the wheel from the top until you hear a click sound. You can then rotate the wheel.

Offset ring

If you want to move the part in the rotating connector freely, you can attach the offset ring to the part first.

.

Painting attachment

You can screw the painting attachment on console to use like a painting handle.

Pegs

To make a peg you need a peg mount and then peg part 1 and peg part 2 and a spring from a normal peg. I know, I wrote that this system is fully printable, so there is an option to print a fully printable peg model instead of peg part 1 and peg part 2. However, this peg does not work as well as the spring peg.

PCB holder

Pcb holder is used to attach PCB, but maybe you find another usage of this part.

Solder holder

To assemble the solder holder you need print solder holder part 1, solder holder part 2 and solder holder part 3. Then screw part 2 into part 3 and you can use the model to attach the solder.

Vise attachment

This part slides onto the console.