This is V1 of my case. This is meant to hold:

• Magspoof board from RabbitLabs
• cc1101 without antenna
• cc1101 with antenna
• nrf24 without antenna
• cc1101 915mhz from RabbitLabs
• nrf24 with antenna
• External CC1101 NRF24 module from Rek5lab
• Other odds and ends for the Flipper Zero

After printing, use two 3Mx15mm screws for the hinges (16mm work as well) and four 3Mx20mm screws for the latches.

If there are any other tray/bottom designs I should add, tell me down in the comments.