Hinged print in place mount/bracket, that locks to the tripod leg with a screw.

The bracket have a standard camera shoe ), where you can attach accessories like an external microphone.

I made the adapter for my Manfretto tripod, wich have an oval leg with the dimention: 2 * 2,55 mm).

The screw is printed without with the head down. Support is not necesary, but a brim is recommended. I resized the screw down to 98% in the X and Y dimention, but kept 100% in the Z dimention to add some tolerance.

I printed the main modell with the back of the camera shoe slot down (the hinges vertically and the screw hole horisontaly). I printed the main model without support and with a brim.

The PLA print came out great on my X1C, with smooth action on the hinges and low friction between the screw and screw hole threads.