Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.6mm

Filaments Used:
PLA Overture Matte Black Transmission Distance: 0.1
PLA Elegoo Red Transmission Distance: 4.2
PLA Overture Green Transmission Distance: 1.1
PLA Overture Matte White Transmission Distance: 3.7
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #9 (0.8mm) swap to Green
At layer #14 (1.2mm) swap to White for the rest.