Flaming Fox V8 engine《FF-V8》
author：WHANGENG

Size: 217X160X151mm            

Total mass: 1.1-1.2KG                    
Mass: Calculated according to the configured configuration: A1min
Printing time: A1mini: 47h       

Mounting accessories: 3M14mm, 103 ±1pcs; 2M10mm, 52±1 pcs                                 
Screw Type:  Countersunk screws             

 MATERIAL CONSUMPTION: 1+ VOLUMES                                
Material recommendation: PETG/PLA             

Date of manufacture：2024.6.14

Last updated date：2025.12.25
                   
 

                                                                                           Other Notes
Note: When installing the top two pinions, the buckle should not be pressed too tightly, otherwise the operation will be affected.

When installing, be careful to leave a little gap for moving parts

1.To install the drive module, it is necessary to lubricate the model, which can reduce friction noise of mechanical components (such as the crankshaft, gears, pulleys, fixed shaft covers, etc.).

2.For the drive module, please refer to the PDF for the parts list. The total cost is less than 10 yuan.

3.If you need to replace it with the drive version, please print the configuration released by the author. Thank you.