Paint Brush Storage Box

*Edit:
I've added two extra print profiles with all the available paint brush boxes. I did this in case people aren't able to download and print the STL files. I've also made a print profile for the A1 mini with all the Paint Brush Boxes that would fit on the build plate.
I changed the layer height for a faster print. Although the 0.12mm layer height would result in a smoother and higher detail of the drops from the lid, and the slope of the box.

I don't have a dedicated spot where I can leave my paints and brushes. Thus I was looking for a paint brush storage box where I could store my brushes in, take them with me without the fear of damaging my brush tips.

The Boxes have the following features:

The Box has a slanted floor so the brushes are not rolling on their tips when the box sits flat on the table.
The edge has notches so you have a place where you put your brushes without them rolling anywhere.
The Lid has the same feature but it doubles as dripping paint tray.
The brush logo, besides being pretty, has the function to indicate which way your brushes are oriented (you'd still have to place the lid correctly). That way you know which way you can orient the box vertically for travel.
They are stack-able as well. But only in their own size with the same amount of compartments.

The following sizes are available:

180, 200 and 245mm.
- All 180 sizes fit on the A1 mini as well
- 200 - 1 fits on the A1 mini at 45degrees.
1, 2, or 3 compartments.

The following size brushes would fit in the different sized boxes:

Note that this would be from tip to tip.

Box 180 - up to 162mm
Box 200 - up to 182mm
Box 245 - up to 228mm

Don't worry if you don't have a multi-color printer. I've added a small 0.4mm groove that outlines the brush on the lid. That way you would still get the brush as an outline on your lid if you were to print it in just one color.

Happy Painting!

_____________

Tabletop Wargame Assets:

Miniature Painting Assets:

Tabletop Role-Playing Game:

Descrição