The 3D model of a lightbox featuring the Nutella logo is a delectable and delightful design. This charming lightbox pays homage to the beloved hazelnut spread, Nutella, with its iconic logo. When illuminated, it exudes a warm and inviting glow that's sure to make your space feel cozy and sweet. The flexible design of this lightbox enables you to adjust its size, allowing you to fit it perfectly in your kitchen, dessert corner, or any spot where you want to celebrate your love for Nutella. It's an ideal decorative piece for anyone with a sweet tooth and an appreciation for this scrumptious treat. 🍫🌟

If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign!

Materials and tools:
- glue gun
- aluminum tape
- led strip (here is the one I use): simple 1m white led USB

- soldering iron (optional)

RECOMMENDATIONS

- use a textured PEI sheet
- use the print profile, it has quite a few setting changes that help achieve the best results
- make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer

- use the aluminum tape on the inside of the backplate to help with light diffusion
- glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible

Bambu Studio Settings:
I always recommend using the print profile I provided since it has settings with which I've been able to get the best results.
If you choose not to here are the main slicer settings I recommend:
- preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04
- Quality → Wall generator → Arachne
- Quality → Wall transitioning threshold angle → 50º
- Strength → Advanced → Infill/wall overlap → 20%
- Quality → Advanced → Avoid crossing walls
- Increasing retraction / reducing temperature can help reducing wisps
- Order color printing from lightest to darkest color

How to make a hole in Bambu Studio:

Assembly video: