Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Planter with Water Tray
Also check out the Small Planter with Water Tray.
You can pour the water directly onto the tray, from which it flows into the pot, or if you pour into the pot, the excess water will drain onto the tray.
Note that due to the overlap of the ribs, when pouring water on a tray, be careful not to flood the water. Pour into several grooves a bit like swiping horizontally. If you want, you can scale the pot like 1 or 2 % smaller to create a better water flow to the tray.
Sizes:
Pot and Tray together 180x180x150 mm - 7 x 7 x 5,9 inches
Inner Diameter 129mm - 5 inches
Scalable down and up!
My own 120x120x120 growing pot fits inside this. If you use a growing pot inside, make sure the size of the model before printing. The bottom is moderately narrow. Scale if needed.
Hope you like this one! Happy printing!
