Printed using 1kg Spool of PETG (used roughly 900g of filament)
Print Orientation has to be changed, print parts like “Right side” lying on the right side for optimal print results 

3x M4 Screws are needed for the Assembly of the Regular Chassis
No Screws are needed for the Modular without the “Roof” or “Support Brace” Module

If you add the Support Brace Module, you will need 2 additional M4 Screws
With the Roof Module you will need at least 4 additional screws
 

If the design files are needed just hmu on discord: yami.fpv