已升级V2.0，请移步/Upgraded to v2.0, please go to:

[https://makerworld.com/zh/models/495584#profileId-409765](https://makerworld.com/zh/models/495584#profileId-409765)

无需复杂的组装！活动模块一体成型，打印出来就可以活动！

灵感来自LIHIT LAB 的获奖作品 A-3575 Firm Book End，结合古典欧洲的建筑风格设计出来的书架。（中式建筑风格正在设计中，敬请期待）

不得不说这是一个很巧妙的设计，能够始终让书本保持直立，即使从中间抽出书本，相应的模块就会落下，其它的书也不会倒。

但是原版的设计比较单调，并且售价过于高昂，于是我决定设计出这款更好看的书架，在外观和使用细节上做了优化。

注意事项：

1.只需要打印两部分，并将二者拼在一起就行。我设计了暗扣，拼装过程中可能会听见“咔哒”一声，就代表拼装到位了。

2.书架侧面我设计了插槽，这样就可以让多个书架并在一起。

3.我在底座的底面预留了防滑贴的位置。我使用的是22mm*12mm*1mm的方形防滑贴，购买链接可以参考：[https://m.tb.cn/h.gfPUZwgT9sZHbZI?tk=XQAuWC7J9I8](https://m.tb.cn/h.gfPUZwgT9sZHbZI?tk=XQAuWC7J9I8)

——————————————————————————————————

No complicated assembly required! Integrated molding and printed out ready to use!

Inspired by LIHIT LAB's award-winning A-3575 Firm Book End, the bookshelf is designed with classical European architectural style. (Chinese architectural style is under design, stay tuned)

I have to say that this is a very clever design, which can always keep the books upright, even if you pull out the books from the center, the corresponding modules will fall down, and the other books will not fall down.

But the original was boring and sold for too much money, so I decided to design this better looking bookshelf, optimized in appearance and usage details.
 

Notes:

1. just print the two parts and put the two together. I designed a secret button, during the assembly process, you may hear a "click", which means that the assembly is in place.

2. I designed slots on the side of the bookshelf so that multiple bookshelves can be put together.

3. I reserved a place for the non-slip stickers on the bottom side of the base. I used 22mm*12mm*1mm square non-slip stickers, you can refer to the purchase link:[https://m.tb.cn/h.gfPUZwgT9sZHbZI?tk=XQAuWC7J9I8](https://m.tb.cn/h.gfPUZwgT9sZHbZI?tk=XQAuWC7J9I8)