This is a simple rotating display turntable for photography or videography. This was my first foray into using gears, and I'm very proud of it. It is 100% 3D printed except the motor! The top plate is also printed flat and is easily replaces, allowing for customization with different colors as well as textures using the new 3D Effects Plates.

THIS BUILD REQUIRES ANOTHER PRINTED PART: [https://makerworld.com/en/models/112075?from=search#profileId-216164](https://makerworld.com/en/models/112075?from=search#profileId-216164)

PLEASE PRINT AT THE HIGHEST POSSIBLE QUALITY, IT WILL MAKE THE DISPLAY RUN SMOOTHER

Parts you will need:

Bambu TT USB Motor (linked below)
TT Motor Speed Controller (Optional but recommended, also below)

I would recommend against printing this in abrasive materials such as CF or GF filaments, as there are plastic parts that must maintain contact at all times and may be worn down over time if the filament is abrasive. I would also recommend against using PLA Silk, as I do not believe it will be strong enough to hold the motor without snapping the pegs that lock it in position.

I HAVE NOT TRIED THIS PRINT IN HIGHER SPEEDS THAN STANDARD. Printing this on sport or Ludicrous may cause defects or changes in fitment that could affect the function of the display. Try at your own risk!

BUILD TUTORIAL: [https://youtu.be/ix6GSkEO510](https://youtu.be/ix6GSkEO510)