Horizontal, Vertical, Stacked or fully enclosed - It's up to you!

I designed this holder as a modular system so it can be stacked, fully enclosed, or combined.

The space between each plate is big enough, so one can easily grab the desired plate without having to fiddle around

The design is easy to print: Front & Rear facing down, and Sides on their sides.

The holes are suited for 3x20mm hex-screws, but you can easily use shorter ones.

------------------------------

V0 = Capacity up to 4 plates

- V0: 

1.2mm spacing for each plate.

Fits all Standard (Engineering, Smooth, Textured, Cool) plates

- V0 Extended:

1.6mm spacing for each plate.

Fits all Standard & Bambus new 3D Effect Plates.

- V0 Xtreme:

2.0mm spacing for each plate. 

Should fit any plate

V2 = Capacity up to 5 plates ⚠ does not print on A1 Mini

- V2 (Classic):

1.2mm spacing for each plate.

Fits all Standard (Engineering, Smooth, Textured, Cool) plates

- V2 (Classic) Extended:

1.6mm spacing for each plate.

Fits Standard & Bambus new 3D Effect Plates.

- V2 (Classic) Xtreme:

2.0mm spacing for each plate.

Should fit any plate, even the thickest.

------- Full Enclosure -------  Only 3 steps away to dust-proof your plates!

(1 of 3) Closed Rear Panel:

Your first step to fully enclose your build-plates and have them free of dust.

(2 of 3) Closed Top Cover: 

A simple top cover to further prevent dust collection.

⚠ Requires disabling the “Bed exclude area” (more info down below)

(3 of 3) Closed Front Panel: Choose the right one: V0 or V2.

The final step to fully enclose your plates and put an end to dust build-up.

⚠ Instructions: The Closed Front Panel is mounted on top of the already existing front (the print will automatically stop at layer 32 to insert the magnets)

You need: 

2x Ø6x3mm magnets (I)

2x M3x14 - 18mm hex screws (II)

4x M3x20 - 25mm hex screws (of which 2 should be of steel so that the magnets have something to attach on) (III)

*In case you don't want to use, or don't have magnets on hand, just resume the print after being paused or delete the pause before printing and tighten the side-screws (II) a little more to create slight friction. 

------- Tool -------

Clearance Test:

If unsure which spacing best suits your plates, 

please print the "Clearance Test" first and select depending on your preference or need.

------- Add-Ons -------

P1S Stacker: 

To easily stack your A1M Build plate holder.

Closed Top Tray: 

Simple top tray (to avoid dust collecting on plates)

Closed Top Comp. Tray: 

Tray Top cover with 2 flat & 2 rounded compartments.

A1M on P1S Stacker: ⚠ Does not print on A1M.

To easily stack your “A1M Build plate holder ” on top of the A1/P1/P2 Build Plate Holder

⚠ Requires disabling the “Bed exclude area” (more info down below)

To disable the “Bed exclude area”, please follow the Bambu Lab Wiki or directly download this tool.

------------------------------

If you like my design, I’d really appreciate your feedback!

It would mean the world to me. Thank you! 😊