I'm thinking about making a comicbook of the ninja turtles. In in the Utrom's detonate a bomb and level New York. The turtles are trying to figure out what to do next and things move in a different direction from the 80's cartoon series.

Here is Donatello, who has re-built himself into a cyborg after being badly injured in the Utrom's attack.

NOTE: I printed this with a metallic purple filament and it did not come out as clean as the others.

Project: Donatello - Cyborg.hfpPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm The Model is 152.47x228.6mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2mm and the Actual Depth is 2mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.9PLA Sunlu Purple Transmission Distance: 6PLA BambuLab Basic Gray Transmission Distance: 2PLA BambuLab Matte Ivory White Transmission Distance: 3.9This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #6 (0.4mm) swap to PurpleAt layer #17 (0.84mm) swap to GrayAt layer #18 (0.88mm) swap to Ivory White for the rest.