Bambu Tools - Bambu Lab Tool Set LABELED — STL Grátis

Bambu Labs 6 Piece Tool Set w/LABELS

Included Tools & Hints for Printing:

HINT: Having an issue with letters sticking to build plate?
1. If using a smooth plate (recomended for higher quality text) still set slicer to textured for that extra squish.
2. Clean the build plate.
3. Use a very light amount of glue stick or Nano Polymer
4. Be sure you are using my profile or slow down the first layer even more (should not be required)
QUALITY HINT: Smooth build plates will resolve better quality text and other fine detailed first layers. PRO TIP: set slicer to textured (even with smooth plates) for that extra squish.
AMS Power Cable Disconnect - Pushes the hidden clip that is facing printer on the AMS Buffer & Hub.
AMS HUB PTFE Disconnect - Remove PTFE tube from the Bambu Lab AMS Hub (Smaller than Buffer)
AMS BUFFER PTFE Disconnect - Remove PTFE tube from the Bambu Lab AMS Buffer (Larger than Hub)
Buffer Fork - Fits between spring (through the slot, no need to remove buffer/hub) and slide/push on the PTFE coupler in the AMS Buffer/Hub. Also works great for PTFE removal on hotend and inside the AMS during PTFE repairs.
2x Hotend Wire Disconnects - If you need a helping hand removing the Bambu Hotend/Nozzle Connectors.
If you want to up your cool game, use 6x2mm Magnets. Pay close attention to the magnets polarity (all should face same direction/polarity). They're designed to fit magnets snugly, but you might need a little glue for some of them.