Prints strong with crisp filter threads. I'm using it to filter the input on a water pump. To figure out the size of the filter, I just measured the distance from the center of the pump's input barb to the ground, doubled it and set that as the filter's diameter. That made the filter as large as possible while letting the pump sit on the ground.
Set the connector size to the outside diameter of the pump's input.

Be sure your slicer settings match the slicer settings in the customizer for the best results.

NOTE: The mesh will disappear in the slicer after you slice the custom screen you've created. To fix it, set the Wall Generator to Arachne in the slicer.