Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 127x180mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2mm and the Actual Depth is 1.9mm

Filaments Used:
PETG Creality Black Transmission Distance:
PETG Tpoimns Gray Transmission Distance:
PETG Creality White Transmission Distance:
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Gray
At layer #15 (1.28mm) swap to White for the rest.