Inserts for the Medium Harbor Freight Organizer Bins (similar to my small and large bins). Inserts have a spot for labels. Versions for both vertical and horizontal orientations.

This is inspired by the many of the other inserts that I have tried over the years; none of them exactly matched my needs so I finally designed my own version. I hope others find this useful.

I printed all of these with a 0.4mm nozzle at 0.28mm layer height in PLA on my Bambu Labs P1S. I recommend ironing the top most layers especially if you want to write on the label. The 3x4 and 4x3 inserts may need a brim (otherwise the tend to fall over at about the 90% done mark.) All but the smallest inserts were printed successfully in “Sport” mode.

Many different sizes.
Files are named using the following pattern:
A_B_CxD.stl:
A: SB = Small Bin (Will be releasing versions for the Medium and Large Bins later)
B: V = Vertical OR H = Horizontal
C: number of Horizontal divisions/Columns

D: number of Vertical divisions/Rows
ex: SB_V_2x3.stl = Small Bin Insert, Vertical orientation, 2 Columns of 3 Rows.

Please leave feedback and let me know if you have any issues (I have printed all of these on my P1S and tested and used them.)